This Diff Overhaul Kit is suitable for later type 2 Pin Land Rover Diffs (i.e. Not Salisbury or Land Rover 4 Pin).
All OE quality Bearings, dependent on stock at time of order but will be Koyo, NSK, NTN, or Timken (All approved suppliers of bearings to Land Rover)
Note there are two different side bearing types used in the Land Rover 2 pin Diffs, this kit is for the later bearing type " Metric" diffs fitted from around 1993/4 and usually 24 Spline Shafts. Your vehicle may have had a recon Diff fitted or an Axle change at some point in it's life so you should not always rely upon age or Axle number.
If you already have the Diff Stripped you can identify the type from Side Bearing internal diameter. Early Imperial types have an ID of 41,3 mm, Bearing number is LM501349 / LM501310, This kit Diff diff side bearing is 45,2mm Bore Bearing number LM102949/LM102910.
You can also identify the "Metric" Diffs by checking the 4 large journal end cap bolts. Metric bolts should have '8.8' stamped on the head.
This later kit was used in:-
Defender From approx 1993 from VIN Number LA930456
Discovery 1 From LA930456 Axle Numbers 38L03121-38L99999, 39L05553-39L99999, 42L00522-42L99999, 43L18580-43L99999, 71L00001-78L99999
Range Rover Classic From Vin Number KA637569
Your vehicle may have had a recon Diff fitted or an Axle change at some point so please check your side bearing sizes / bearing number if possible before ordering. This kit is NOT suitable for 4 Pin diffs or Salisbury Axles.
The Kit Contains :-
Pinion Head & Tail Bearings
Side Bearings Pair
Gasket
Pinion Flange Fasteners ( Both Nut & Bolt Type )
